 | Select a small stencil shape, such as a Star, Christmas Tree etc. Copy
this shape onto a piece of soft card or paper.
|
| Cut out the shape and discard the inner section. Apply a light wipe of
Pritt Stick around the edges of the design on the reverse side of the stencil. You may
prefer to use Double Sided Tape for this.
|
| Gently apply the stencil to the candle and firm down the edges. apply a
light coat of glue to the candle through the stencil.
|
| Allow the glue to become tacky before sprinkling the Accent beads over
the glue.
|
| Gently push the beads into the glue using a finger.
|
| When dry shake off the lose beads onto a saucer and gently remove the
stencil.
|
| The above method can be used again to enable several designs to be
created.
|
| To finish off apply a narrow band of double sided tape around the base
of the candle.
|
| Remove the backing tape and gently sprinkle accent beads to the tape.
Gently rub the beads to ensure a good stick.
|
| Shake off any remaining beads onto a saucer.
|
