 | Place the material face down on a flat surface. |
| place the cork mat down in the centre of the material. |
| apply a liberal amount of glue to the back of the mat along one side about 1/2 in inch
in from the edge. Alternatively use double sided tape. If using double sided tape. Apply
lengths along each edge. |
| Fold back the material overlap over the glue and allow to dry. |
| Once dry apply glue to the mat along the opposite length. |
| Firmly pull the material to make tight and fold down over the glue or tape. |
| Hold firmly with a clothes peg until dry. |
| Once dry repeat this process along the two remaining edges. |
| Arrange your flower display, ensuring it will fit within the dome of the egg shape. |
| Tape or bind the flower stems, and hide with a bow etc. |
| Place a sticky fixer on the back of the flower display and stick the display carefully
in the centre of the board. |
| Cut around the base of the egg shaped dome, leaving a small boarder to enable glue to
adhere. |
| Apply a light coating of PVA glue to the rim and gently place over the flower
arrangement, ensuring that the boarder distance is equal on opposite sides. (Your PVA glue
will dry clear.) |
| Once dry, cut a piece of card or material just smaller than the size of the mat and
stick down on the back to cover the overlapping material. |
| Apply a hanging hook to the back. |
