| MECHANICAL EYELET TOOLSET 2.5 &
3.5mm eyelets |
 |
 | This is a MUST HAVE
tool for all card makers and scrapbookers alike. No need for a hammer.
This new mechanical eyelet tool makes perfect holes quickly with the
minimum of effort. Instead of using a hammer the setter tool now has a
mechanical striker built into the tool. |
| Instructions for use:
|
|
 |
| Instructions for use:
 | Inserting your eyelet.
 | Push the eyelet through the hole from the
front of your project. |
|
|
|
 |
| Instructions for use:
| Setting the eyelet
| Change the eyelet cutter head to the setting
head. |
| position the setting tool on the eyelet |
| hold the setting tool vertical to the
project. |
| pull up the striking tool. |
| Release the striking tool. |
|
| Job done. A perfectly completed eyelet with the
minimum of fuss. |
|
| Hints and tips.
| If your backing board is too hard, the cutting
tool may have problems making a perfect cut. Simply rotate the
tool 1/3 of a turn. Restrike. Turn a further 1/3 and restrike.
Alternatively try using a backing board with a little bit more
give, allowing the perforating tool to make a clean cut every
time. We used an old self healing cutting mat giving a perfect
result every time. |
|
|
 |
Mechanical Eyelet Tool Kit £6.63  |
|
|
|
|
|
|
|
|
|
